PF-exer1

HARD DRIVE

(is a non-volatile storage device which stores digitally encoded data on rapidly rotating platters with magnetic surfaces.)

The Platter

A hard disk platter (or disk) is a component of a hard disk drive: it is the circular disk on which the magnetic data are stored. The rigid nature of the platters in a hard drive is what gives them their name (as opposed to the flexible materials which are used to make floppy disks). Hard drives typically have several platters which are mounted on the same spindle.

Spindle and Spindle Motor

The spindle motor, also sometimes called the spindle shaft, is responsible for turning the hard disk platters, allowing the hard drive to operate. The spindle motor is sort of a "work horse" of the hard disk. It's not flashy, but it must provide stable, reliable and consistent turning power for thousands of hours of often continuous use, to allow the hard disk to function properly. In fact, many drive failures are actually failures with the spindle motor, not the data storage systems.

A spindle is the axis on which the platters of a computer hard disk spin. Database performance can be improved by spindling, the action of mounting data files and index files on different hard disks so that contention for read or write resources is diminished.

The Read-Write Head

Disk read/write heads are mechanisms that read data from or write data to disk drives. The heads have gone through a number of changes over the years.

The Head Actuator

The actuator is the device used to position the head arms to different tracks on the surface of the platter (actually, to different cylinders, since all head arms are moved as a synchronous unit, so each arm moves to the same track number of its respective surface). The actuator is a very important part of the hard disk, because changing from track to track is the only operation on the hard disk that requires active movement: changing heads is an electronic function, and changing sectors involves waiting for the right sector number to spin around and come under the head (passive movement).

Ribbon Cable

A ribbon cable (also known as multi-wire planar cable) is a cable with many conducting wires running parallel to each other on the same flat plane. As a result the cable is wide and flat rather than round. Its name comes from the resemblance of the cable to a piece of ribbon (which is likewise wide and flat).

Base Casting

The bottom of the disk is often called the base casting, the name coming from the manufacturing process used to create the single piece of aluminum from which it is normally made. The drive mechanics are placed into the base casting, and another piece of usually aluminum is placed on top to enclose the heads and platters.

MOTHERBOARD

(is the central or primary circuit board making up a complex electronic system, such as a modern computer.)

IDE Connector

Most motherboards have two IDE connectors, which allow two drives to be attached to each connector. One drive is set to master and the other drive is set to slave by using a jumper that is normally located on the back of the drive. This allows a total of four IDE devices, (or drives), to be attached to a typical computer.

Processor Socket

is widely used to describe the connector linking the motherboard to the CPU(s) in certain types of desktop and server computers, particularly those compatible with the Intel x86 architecture.

PCI

The Peripheral Component Interconnect, or PCI Standard (in practice almost always shortened to PCI), specifies a computer bus for attaching peripheral devices to a computer motherboard. These devices can take any one of the following forms:
An integrated circuit fitted onto the motherboard itself, called a planar device in the PCI specification.
An expansion card that fits into a socket.

AGP

The Accelerated Graphics Port (also called Advanced Graphics Port, often shortened to AGP) is a high-speed point-to-point channel for attaching a graphics card to a computer's motherboard, primarily to assist in the acceleration of 3D computer graphics. AGP is often referred to as a 'bus'; however, this is a misnomer - a single AGP controller is only capable of controlling a single device.

SATA

Serial ATA is a computer bus primarily designed for transfer of data between a computer and storage devices (like hard disks or optical drives).
The main benefits are thinner cables that let air cooling work more efficiently, faster transfers, ability to remove devices while operating (Hot swapping), and more reliable operation with tighter data integrity checks.

South Bridge

The south bridge is often referred to as the I/O controller. The features of the south bridge change less often than the those of the north bridge. From chipset to chipset, nearly all south bridges have support for integrated sound, LAN and modem, ATA and USB.

Memory

Memory refer to computer components, devices and recording media that retain digital data used for computing for some interval of time. Computer storage provides one of the core functions of the modern computer, that of information retention.

MONITOR

(is a piece of electrical equipment which displays viewable images generated by a computer without producing a permanent record.)

SYSTEM UNIT

(The main part, processing unit and devices, of a microcomputer is a system unit.)

Motherboard

A Motherboard or system board is the main printed, flat circuit board in an electronic device such as microcomputers. The board contains expansion slots (sockets) that accept additional boards (expansion Cards).

Microprocessor

A microprocessor is a processor whose elements are miniaturized into one or a few integrated circuits contained in a single silicon microchip. It executes instructions.

Memory Chip

A memory chip is a chip that holds programs and data either temporarily or permanently. The major categories of memory chips are RAMs and ROMs.

System Clock

The clock is a device that generates periodic, accurately spaced signals used for several purposes such as regulation of the operations of a processor or generation of interrupts.

Ports

A port is an external connecting socket on the outside the computer. This is a pathway into and out of the computer. A port lets users plug in outside peripherals, such as monitors, scanners and printers.

Buses

A bus is a data pathway between several hardware components inside or outside a computer. It not only connects the parts of the CPU to each other, but also links the CPU with other important hardware.

Expansion Slots

Expansion slots are receptacles inside a system unit that printed circuit boards (expansion boards)are plugged into. Computer buyers need to look at the number of expansion slots when they buy a computer, because the number of expansion slots decides future expansion.

KEYBOARD

(is a peripheral partially modelled after the typewriter keyboard. Keyboards are designed for the input of text and characters and also to control the operation of a computer.)